This Frymaster J1CSD 15-20
lb. gas countertop fryer is
available in both natural and
L.P. gas. It has a stainless
steel pot, door and cabinet.
The frying area of the J1CSD
is 11" x 12", holding 15-20
pounds. The J1CSD has a rack-
type basket support, basket
hanger, two twin baskets, and
legs. The J1CSD has a 45,000
BTU input. The J1CSD has a
unique 1 degree, action thermostat
helps extend the life of the
fryer oil. The jet burner
design features no burner
tube radiants to burn out,
and no burner cleaning or air-
shutter adjustments are
necessary. The open frypot
design on the J1CSD features
no tubes, so the entire
frypot can be easily hand
cleaned. All components on
the J1CSD have one year parts
and labor warranties.
Vendor Item Numbers: J1CSD - LP, J1CSD
About Common Carrier Shipments:
We want your delivery to go smoothly, so we kindly ask that you read the
following tips:
(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.
(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.
(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.
(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.
