Dormont WD-20 Grease Interceptor 40 lb. Grease Trap
- PDI Certified
- 20 GPM flow rate and 40 lb. grease capacity
- 3" inlet & outlet
|Width||15 3/4 Inches|
|Flow Rate||20 Gallons Per Minute|
|Inlet and Outlet Size||3 Inches|
The Dormont WD-20 Grease Interceptor 40 lb. grease trap prevents greasy substances from entering plumbing systems, septic fields, and wastewater treatment facilities where they cannot be processed properly and could harm the environment.
Grease traps like the Dormont WD-20 are often used with cooking or prep sinks, pot sinks, and commercial dishwashers in various types of commercial food service operations. A flow restrictor on the inlet side of the interceptor slows incoming effluent and redirects it through baffling inside the grease trap.
As the flow is gradually slowed, lighter than water substances accumulate inside the trap above the static water line.
The Dormont WD-20 Grease Interceptor features a body constructed of 11-gauge cold rolled steel with an oven-cured, acid-resistant baked gray epoxy coating. Other standard features include a solid steel cover with gasket, a removable baffle assembly, a deep seal trap with cleanout, no hub connections, and an external cast iron flow control fitting (flow restrictor).
The Dormont WD-20 grease trap has a grease capacity of 40 lbs., and a flow rate of 20 GPM. It is PDI (Plumbing & Drainage Institute) Certified, and meets the industry and PDI Standard PDI-G101 for separation efficiency. This standard specifies that the grease trap must maintain 90% separation efficiency up to its rated grease retention capacity.
Please consult the specification sheet for detailed diagrams, measurements, sizing guidelines, and installation requirements.
Extended lead times may apply for this item based on availability. Please contact us for the current lead time.
24"L x 15 3/4"W x 15"H
Flow Rate: 20 GPM (Gallons Per Minute)
Grease Capacity: 40 lbs.
Inlet & Outlet Size: 3"
Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date,
please contact us prior to placing your order. We cannot guarantee that this item can be cancelled off of the order once it is placed.
Dormont WD-4 Grease Interceptor 8 lb. Grease Trap
Dormont GI-400-K Large Capacity Grease Interceptor 800 lb. Grease Trap
Dormont WD-10 Grease Interceptor 20 lb. Grease Trap
Dormont GI-200-K Large Capacity Grease Interceptor 400 lb. Grease Trap
Dormont WD-35-L-THD Grease Interceptor 70 lb. Grease Trap - Low Rough-In with Threaded Connections
Dormont GI-500-K Large Capacity Grease Interceptor 1000 lb. Grease Trap
Dormont GI-300-K Large Capacity Grease Interceptor 600 lb. Grease Trap
Dormont GI-250-K Large Capacity Grease Interceptor 500 lb. Grease Trap
Frequently Purchased Together
Regency 16 Gauge Three Compartment Stainless Steel Commercial Sink with Two Drainboards - 58" Long, 10" x 14" x 10" Compartments
Regency Wall Mounted Swivel Faucet with 8" Centers - 12" Swing Spout
Regency Wall Mounted NSF Hand Sink with Gooseneck Faucet - 17" x 15"
Overall User Rating: Dormont WD-20 Grease Interceptor 40 lb. Grease Trap ( 5.0 stars from 2 reviews )
40 lb Grease trap is required from my local health dept. It is nicely priced, built well and should last for years with an easy off cover for cleaning.
Tuwanna R. from Louise's Sweets Posted on 03/26/2014
The Dormont WD-20 40lb Grease Trap was what the Health Dept required. Easy for the plumber to install and no issues with it yet. Doesn't take up much room either.
Joseph C. Posted on 11/17/2011
Get paid to review this product!
If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.Login or Register