Delfield 10 1/8" - 12" 72 Drop-in Dish Dispenser Even Temp Heated

This even temp heated drop-in dish dispenser from Delfield has a tube with 3 vertical side channels and a bottom brace of 22-gauge stainless steel. The tube on the dispenser has a 22-gauge stainless steel outer jacket. Unit has a 4' cord and NEMA 5- 15 plug. Electrical connections are 120 volt, 60 hertz, single phase. The tube has its own convection- heating module consisting of a single, 400-watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake has a filer. Tube has an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Dish dispenser requires a minimum of 1" clearance at bottom for air circulation. Dispenser maintains a temperature between 120 degrees Fahrenheit and 140 degrees Fahrenheit. Top supporting flange is 18- gauge stainless steel. Flange, channels and bottom brace are integrally welded together. The flange has 3 guide posts molded of high impact plastic. It has a self- leveling mechanism that is field adjustable by adding or removing stainless steel extension springs on the perimeter of vertical side channels. The dish carrier head is constructed of welded, stainless steel rods with a removable 18-gauge steel top plate. Diameter of flange is 15.37" and cutout diameter is 14.75". Tube height is 28" and holds 72 plates. This dispenser has a dish diameter range of 10.12"-12.00". NSF listed. This product is also known as DEL-1200ET.