• Holds 135 5 oz. cups
  • Customizable back-lighted display
  • UL and NSF Listed; 120V
Usually Ships in 1-2 Business Days
MFR Item:

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

How to Use a Curtis Cappuccino Machine

How to Use a Curtis Cappuccino Machine

Removing the canisters. When removing the canisters, it is important to rotate the canister elbow to the up position. This helps reduce the risk of any product loss. Once the elbows have been rotated, gently lift on the tab provided and slide the canister out. Filling the canisters. Place the canister on a level surface and remove the lid. Carefully pour the product into the canister, making sure to leave at least 1/2" of space at the top. Gently move the canister to settle the product, then replace the lid. Cleaning. Using a damp rag without the use of harsh chemicals, gently wipe down the interior of the unit. Be sure to also remove the canister guide plate to clean underneath. Carefully remove the drip tray as to not spill any liquid that may have accumulated. Then, remove the whipper chamber parts in the order shown. Gently wipe the remaining surfaces with your damp rag. Wash, rinse, sanitize. Over the sink remove the drip tray cover and empty its contents. Then, place all removable components into the sink and clean them according to your company's standards. Reassemble and rinse. After ensuring the impeller shaft and receptor are aligned, replace the whipper components in the order shown. Next, replace the drip tray. Once the drip tray has been replaced, gently slide the canisters back into position. Once in position, rotate the canister elbows down. Please note that it is common for product to fall into the whipping chamber when the elbow is rotated. To prevent the excess product from jamming the chambers, run a quick rinse cycle on each station by simply holding down the stop / wash button and the corresponding station button. As a gentle reminder, these cleaning instructions can be found inside the unit's door and should be performed daily.

Copy and paste the embed code above.

Learn how to use and clean your new Curtis cappuccino machine!

Width 20 1/2 Inches
Depth 10 Inches
Height 31 1/8 Inches
Height to Dispenser 7 1/4 Inches
Amps 15 Amps
Hertz 60
Phase 1
Voltage 120 Volts
Wattage 1,800 Watts
Beverage Type Cappuccino
Capacity per Compartment 4 Pounds
Hot Water Faucet No
NSF Listed Yes
Number of Hoppers 2
Pressure 20 - 90 PSI
Tank Capacity 2.01 Gallons
Temperature Settings Adjustable
Water Source Direct Connection


This Curtis cafe series PC2 primo cappuccino machine features a back-lighted, customizable display that is sure to promote more impulse purchases at your coffee shop or convenience store! It has two 4 lb. hoppers so you can always be sure to have hot cappuccino on hand for your thirsty customers. Plus, because of its compact size, standard 120VAC power connection, and close water connection, this unit will fit virtually anywhere and use any available outlet.

The Curtis cafe series PC2 primo cappuccino machine also guarantees precise blending and consistent drink quality. Thanks to its ADS digital control module, you can set the powder-to-water ratio right from the front panel so there's never a need to manually adjust internal valves. It can also be set for continuous or portion control dispensing!

The Curtis cafe series PC2 primo cappuccino machine requires a 120V electrical connection and is UL and NSF Listed. Please consult the Specification Sheet for additional information.

Overall Dimensions:
Width: 20 1/2"
Depth: 10"
Height: 31 1/8"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please note this in the comment section while checking out! Please feel free to log on to our Live Chat should you have any questions before placing your order. After your order is placed, we will update you via email to let you know how this will be shipping to you.


NSF Listed UL C_Classified_US




Cafe Series Spec Sheet Specsheet Cafe Series Manual Manual Wilbur Curtis Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Related Items

Have you used this product?

Log in to write your own review and earn up to $16.00 with video, photo, and text reviews!

Login or Register