|
This CMA-
180TB high temperature
dishwasher is a straight,
tall and single rack machine
with a booster heater, and
is
made of 12 and 14-gauge
stainless steel. The CMA-
180TB can wash 54 racks per
hour and is economical to
operate, as it only uses .96
gallons of water per cycle.
This dishwasher has a
unique, upper and lower,
stainless steel, spray arm-
washing system. There is an
automatic soil purging
system
in the CMA-180TB that
filters
soil particles from the
water
and traps it in an external
unit, which can be
periodically dumped out. The
CMA-180TB has a total cycle
time of 61 seconds and a
water requirement is 140 degrees
Fahrenheit;
it also has a dish clearance
of 27". The control box on
the top of the CMA-180TB is
water-tight and includes a
rack counter, extended
wash/delimer switch and easy-
to-read temperature gauge.
The CMA-180TB comes standard
with a table limit switch
and
pressure regulator valve.
The
overall dimensions of the
CMA-
180TB are 25"D x 25 1/2"W x
69"H. It is available in 208
volts/1 phase, 208 volts/3
phase, 230 volts/1 phase,
and
230 volts/3 phase, is NSF
approved, and comes with a
one year parts and labor
warranty.
An adaptor to make
this machine a corner unit
is
available under item
#25061727.
About Common Carrier Shipments:
We want your delivery to go smoothly, so we kindly ask that you read the
following tips:
(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.
(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.
(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.
(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.
|
