|
This CMA-
180B high temperature
dishwasher is a straight
and
single rack machine with a
booster heater, and is made
of 12 and 14-gauge stainless
steel. The CMA-180B can wash
54 racks per hour and is
economical to operate, as it
only uses .96 gallons of
water per cycle. This
dishwasher has a unique,
upper and lower, stainless
steel, spray arm-washing
system. There is an
automatic
soil purging system in the
CMA-180B that filters soil
particles from the water and
traps it in an external
unit,
which can be periodically
dumped out. The CMA-180B has
a total cycle time of 61
seconds and a water
requirement is 140 degrees Fahrenheit; it
also
has a dish clearance is 17
1/2". The control box on the
top of the CMA-180B is water-
tight and includes a rack
counter, extended
wash/delimer switch and easy-
to-read temperature gauge.
The CMA-180B comes standard
with a table limit switch
and
pressure regulator valve.
The
overall dimensions of the
CMA-
180B are 25"D x 25 1/2"W x
59"H. It is available in 208
volts/1 phase, 208 volts/3
phase, 230 volts/1 phase,
and
230 volts/3 phase, is
NSF
approved, and comes with a
one year parts and labor
warranty.
An adaptor to make this
machine a corner unit is
available under item
#25061717.
About Common Carrier Shipments:
We want your delivery to go smoothly, so we kindly ask that you read the
following tips:
(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.
(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.
(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.
(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.
|
