• Quantity Discounts!

$19.69/Each

Regularly: $20.49/Each

Overall User Rating from 22 reviews

  • Teflon® bristles safe to 500 degrees Fahrenheit
  • Plastic handle stays cool to the touch
  • L-shaped brush
  • Ideal for cleaning coils

UPC Code:

400010044467

Condition:

New
Shipping:

Usually Ships in 1 Business Day
When will I receive my item?

How to Boil-Out a Deep Fryer

How to Boil-Out a Deep Fryer

As oil prices continue to rise, it's important to take advantage of products that allow you to use less oil. Using Frypowder filter aids and oil stabilizers can cut down on the amount of oil used, ultimately saving you time and money. But if you don't properly clean your fryer beforehand, it’s like throwing all that money down the drain! You should always start your fryer oil stabilizer regimen with a clean fryer that’s been boiled out to make sure all dirt and debris has been removed. Otherwise, you may have proteins, polar contaminants, and other matter that will start to contaminate the new oil immediately when added. That will break down the oil quicker, leaving you to change the oil more frequently and ultimately costing you more time and money! This video will show you the proper steps to ensure that your fryer is ready for use by using Noble Chemical Tempest Deep Fat Fryer Cleaner, a high temp fryer brush, and a fryer clean out rod. I will also show you how to safely discard your used oil once you have determined it is no longer usable. Don’t forget to check out our video on MirOil’s fryer oil test strips to help take the guesswork out of knowing when to change or filter your oil. Noble Chemical Tempest Deep Fat Fryer Cleaner is easy to use and thoroughly eliminates all encrusted grease and grime. Just follow these simple steps! Drain all grease from the fryer and safely discard grease using an oil caddy and an approved used oil discard container. Use the fryer clean out rod to clean any remaining debris out of the drain line. Rinse the fryer with hot water to remove excess, un-drained fat. For a fryer holding approximately 30 lbs. of fats or oils, fill with cool water to within 3 to 4 inches of the top. Add 8 ounces of Tempest to the cold water. Boil slowly for 20 minutes. Use proportionately, using more or less depending upon the size of the fryer. After termination of boiling, allow the fryer to drain slowly and use a long handled, heavy duty brush to clean the sides, top, heating elements, and other parts of the fryer. Then rinse thoroughly to remove all residue. For future cleaning operations, less boiling time is required to perform this cleaning operation and the amount of Tempest used may be cut in half. Thanks for watching, and be sure to check out all of the oil filtration equipment and accessories on our website!

Copy and paste the embed code above.

Watch this video to learn how to perform a boil-out to keep your fryer clean! Complete the procedure frequently to save your business valuable time and money.

Specs
Length 23 Inches
Bristle Diameter 7/8 Inches
Bristle Material Teflon®
Dishwasher Safe Yes
Made in America Yes
Type Fryer Brushes

Details

This high temperature brush has stiff, Teflon® bristles in an "L"-shape that withstand temperatures up to 500 degrees Fahrenheit. High temperature brushes save time and promote more frequent cleaning because equipment can be cleaned while still hot. Plastic handle provides a "cool touch" while cleaning hot equipment.

Overall Dimensions:
Length: 23"
Bristle Diameter: 7/8"

  • Made in America

    Made in America

    This item was made in the United States of America.

  • Dishwasher Safe

    Dishwasher Safe

    This item can safely be cleaned in a commercial dishwasher.

Brochure Critical Cleaning Issues

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating:

    Carlisle 4011100 23" Fryer Brush with L-Tip Teflon® Bristles

    4.7 stars from 22 reviews

    19
    1
    1
    0
    1

    People Talk About:

    brush fryer fryers Great clean cleaning helps between deep down

    I use this every time I completely clean my fryer. It get down under the burner tubes and scrubs the interior. A brush you should definitely have if you boil out fryers.

    from H & L on the Hudson Posted on

    This is a really good fryer brush, the silicone bristles take fryer heat very well. We like the straight brush with a single bend in it better but this is also a great brush.

    Posted on

    Great fryer brush unlike others in the past this one does not melt it will last at least a year under heavy usage. We change fryers almost daily.

    Posted on

    Very nice sturdy fryer brush. Seem like it will last through many uses. really helps gets the grime out between those elements that are so close together.

    from river rock Posted on

    carlisle fryer brush makes cleaning the fryers a breeze and so much safer than the way we were doing it. Thanks again webstaurant for the store.

    from B-4 Investments LLC dba Wallys Posted on

    This has worked out just OK for us. It gets the job done exactly how you would expect it to but we do not need to use it that often. When we boil water and our cleaner that seems to clean everything up very well so this is almost not needed for us. It does seem to be durable if you were to use it more frequently than us.

    from Toni's Depot Posted on

    THIS BRUSH HAS THE PERFECT ANGLE FOR CLEANING BETWEEN THE THEMO AND HEAT TUBES WHICH IS VERY HARD PLACE TO CLEAN.THIS BRUSH REMOVES THE HARD WORK FOR YOU.

    Posted on

    We use this brush to clean out the fryer. It helps to get all of the little bits of burnt food out of the fryer. The Teflon holds up to the heat well.

    from Red River Inn &Suites Posted on

    We really like this product It helps so much to get between the tubes of my fryers to remove all the food particles. It is stiff enough to scrub and long enough to reach in the drain spout to keep it from stopping up.

    Posted on

    This brush cost more but it last a lot longer than any other fryer brush we have used at least compared to black bristled brushes. We needed a replacement for the fryer brush that came with the fryer but I wasn't about to pay for a fryer brush just to have it broken again. This fit the bill and have bought this product a couple of times now.

    Posted on

    I was a bit skeptical about spending this much for a brush but with its high temperature capabilities, I'm very satisfied with my purchase. Makes getting in those nooks of the fryer a lot easier.

    Posted on

    Length and angle of the brush make it easy to use in the deep fryers. Very light weight and sturdy. Cleanup now is a breeze. If ever i need another I'll but it here

    from Matheney'z Mobile Food'z Posted on

    Handy item to have for cleaning your deep fryer. Gets into those little places to scrub where you would not be able to otherwise. The L shape bend is nice.

    Posted on

    I bent mine straight, it's great to clean up deep fryer drains while changing! I also use to clean between my grills with amazing results!

    from Union St Diner Posted on

    Nice quality brush. It is Definitely a good item to buy. It reaches all the spots on our fryer. Light weight. I would recommend it to anyone.

    Posted on

    This is a great little tool to keep near a fryer for easy cleaning. Even if you are careful debris tends to block up the drain pipe and this brush makes it easy to clear it even when hot.

    Posted on

    This is a must have item for any fryer that drains! Great for large fryers! This brush makes it easy to get all the way down to the bottom of the fryer without burning your hands!!!

    Posted on

    A great little tool to help clean the fryers in our busy kitchen. Big enough to cut down on cleaning time and small enough to get into hard to reach places.

    Posted on

    Really good for fishing out wires and things that fall into tight spaces. Not so good for cleanning fryers - not enough brush surface and hard to turn in the direction you need it to go.

    from PS Shooters, LLC Posted on

    Works great!!! High quality. Costs less than my local supplier charges, even with shipping charges !!I should have said "My EX-supplier".The UPS man will be busy this year....

    from Pattie Wagon Posted on

    Finally broke down and bought this brush, too long owning a deep fryer without one! Very good quality, heavy duty twisted wire stems and substantial bristles. Outstanding price, too, much less than other suppliers!

    from morton pub Posted on

    Very useful. The shape fits great in fryers. Good tool for fryer cleaning.

    Posted on

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register

Find Related Products

airpot brush     charbroiler brush     winco fryer brush