The Cambro KSC402220 CamKiosk
portable self-contained hand sink cart is a
great way to allow employees or
customers to wash their hands when
you're nowhere near a water hookup! Once
filled, all you need is a 220V electrical
connection! Two 5 gallon fresh water tanks
and two 7.5 gallon refuse tanks provide
approximately 70 hand washings per
fill.
The Cambro KSC402220 self-
contained hand sink cart features a water
heater with a 2.5 gallon capacity that heats
up water in 10 minutes, so you can run
either cold or hot (up to 140 degrees
Fahrenheit) water to the faucet. These
tanks are easy to insert and remove for
filling and emptying. An NSF listed water
pump supplies the water to the
faucet.
This CamKiosk self-
contained hand sink has a body
constructed from double wall high-density
polyethylene with polyurethane foam
insulation for durability and easy cleaning.
The two compartment stainless steel sink
bowl is easy to clean too.
Other
special features of the Cambro
KSC402220 portable self-contained hand
sink cart include molded-in handles on
both sides and four 6" casters (two swivel
and have brakes) for easy maneuverability,
and a paper towel holder and soap
dispenser (paper towels and soap not
included).
The Cambro
KSC402220 CamKiosk portable self-
contained hand sink cart can be used as a
standalone station or can be connected to
a CamKiosk vending cart with the
Connector Bridge, found under item
number 214KMC24.
Dimensions
are: 40 9/16"L x 32 1/2"W x 45 1/2"H. 220V.
Some assembly required. The water pump
and water heater are UL listed, and the
water pump is also NSF Listed.
Please note: The
Cambro KSC402220 CamKiosk portable
hand sink cart is designed for hand
washing only. It is not intended to
dispense water for drinking.
About Common Carrier Shipments: We want your delivery to go smoothly, so we kindly ask that you read the
following tips:
(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.
(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.
(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.
(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.
