The Cambro KSC402 CamKiosk portable
self-contained hand sink cart is a great
way to allow employees or customers to
wash their hands when you're nowhere
near a water hookup! Once filled, all you
need is a 110V electrical connection! Two
5 gallon fresh water tanks and two 7.5
gallon refuse tanks provide approximately
70 hand washings per fill.
The
Cambro KSC402 self-contained hand sink
cart features a water heater with a 2.5
gallon capacity that heats up water in 10
minutes, so you can run either cold or hot
(up to 140 degrees Fahrenheit) water to
the faucet. These tanks are easy to insert
and remove for filling and emptying. An
NSF listed water pump supplies the water
to the faucet.
This CamKiosk self-
contained hand sink has a body
constructed from double wall high-density
polyethylene with polyurethane foam
insulation for durability and easy cleaning.
The two compartment stainless steel sink
bowl is easy to clean too.
Other
special features of the Cambro KSC402
portable self-contained hand sink cart
include molded-in handles on both sides
and four 6" casters (two swivel and have
brakes) for easy maneuverability, and a
paper towel holder and soap dispenser
(paper towels and soap not
included).
The Cambro KSC402
CamKiosk portable self-contained hand
sink cart can be used as a standalone
station or can be connected to a CamKiosk
vending cart with the Connector Bridge,
found under item number
214KMC24.
Dimensions are: 40
9/16"L x 32 1/2"W x 45 1/2"H. 110V. Some
assembly required. The water pump and
water heater are UL listed, and the water
pump is also NSF Listed.
Please note: The
Cambro KSC402 CamKiosk portable hand
sink cart is designed for hand washing
only. It is not intended to dispense water
for drinking.
About Common Carrier Shipments: We want your delivery to go smoothly, so we kindly ask that you read the
following tips:
(1) When your delivery arrives, how are you going to remove it from the delivery truck? Please keep in mind that the truck driver does not have to help you. Since you are reading this, it is likely that you are ordering an item that is heavy or bulky. If this is the case, we highly recommend that you select the lift gate delivery option when you place your order. This will ensure that the truck that makes your delivery is equipped with a lift gate which can safely lower heavy freight from the truck down to ground level. If you have a delivery dock or a forklift it is likely that you do not need a lift gate delivery. Not sure if you need a lift gate? Please contact us before you place your order, and we will be glad to make a recommendation.
(2) Have a plan in place for getting equipment into your building and set in place. This is completely your responsibility. The truck driver definitely will not help with this! Check the spec sheet before placing your order, to ensure that it will physically fit through your doorways, under ceilings, etc.
(3) When your delivery arrives you will be asked to sign the bill of lading. By signing the bill of lading, you are saying that you have received the product, and it is in good condition. So it is very important that you inspect your merchandise before you sign for it! If there is any damage to the product or the packaging, you must write “Product Damaged” clearly on the bill of lading before signing it! Following these instructions will make it possible for us to help you resolve the problem.
(4) We ship via a variety of freight carriers. We want you to be prepared to receive your delivery when it arrives, so we won’t “keep you in the dark!” We will email the freight carrier name and tracking number to you on the business day after your product ships.
