Say good bye for good to the "lift, slam,
puncture, and rip" can opening techniques
that have been overstressing elbows for
100 years. The Nemco 56050-1 CanPRO
runs smarter,
easier and longer than ever. Why worry
about contamination from the lid in the can,
serious injury from sharp metal edges,
metal filings or other problems created
using the old can opener technology of the
past? The cutter never makes contact with
the inside of the can. No metal shavings
fall inside of the can. The lid comes off
clean with no jagged edges. The cutter will
not penetrate past the first layer of metal on
the lid's seam, alleviating the potential of
producing metal slivers if the user over-
rotates the can. When the cutter runs its life
cycle, it won't cut at all, clearly indicating
that it should be replaced. Nemco has
opened
over 7,000 lids and the original cutter is
still cutting!
Loading
